PHI*

Lance WDG

• For control of Alternaria only.
• Repeat at 7 to 14 day intervals.
• Apply before disease develops.
• Do not make more than 5 applications per season.
• No more than 2 consecutive applications before alternating with a fungicide with a different mode of action.
• Do not enter treated area for 12 hours.
• For crops not on the label, observe a plant back interval of 14 days.

Cantus WDG

Sercadis

• For control of Alternaria only.
• Repeat at 7 to 14 day intervals.
• Do not make more than 3 applications per season.
• Do not apply more than 1.0 L/ha (405 mL/acre) per season
• No more than 2 consecutive applications before alternating with a fungicide with a different mode of action.
• Do not enter treated area for 12 hours.
• For crops not listed, observe a plant back interval of 1 year.

Pristine WG

• Begin applications prior to disease development and continue on a 7 to 14 day schedule.
• Do not apply more than 6 times per season.
• Do not re-enter for hand-harvesting for 3 days after applying. For all other activities, do not re-enter until residues have dried.

Bravo 500

• Repeat at 7 to 10 day intervals.
• Do not apply Echo 90 DF more than 7 times per season.
• Do not enter treated area for 48 hours.
• Do not apply within 10 days before or after an oil application.
• Group M fungicide

Echo 90 DF

Echo 720

Polyram DF

• Apply when plants are 6 weeks old or when disease threatens.
• Repeat every 7 to 10 days.
• Do not use treated tops for food or feed.
• Group M fungicide

Dithane DG Rainshield NT

Dithane F-45

Penncozeb 75DF

• Apply when plants are 6 weeks old or when disease threatens.
• Repeat at 7 to 10 day intervals.
• Do not enter treated areas for 24 hours.
• Do not use treated tops for food or feed.
• Group M fungicides.

Penncozeb 75DF Raincoat

Cabrio EG

• Maximum of 3 applications per season.
• Repeat at 7 to 14 day intervals.
• No more than 2 consecutive applications before alternating with a fungicide with a different mode of action.
• Do not enter treated area for hand-harvesting for 3 days and for all other activities, do not enter for 12 hours.
• Do not use treated crop for feed.
• Apply in at least 225 L/ha (90 L/acre) of water.

Manzate DF

• Repeat at 7 to 10 day intervals.
• Do not use treated tops for feed or food.
• Do not apply where runoff is likely to occur.
• Apply in 200 to 1000 L/ha (80 to 405 L/acre) of water.

Switch 62.5 WG

• Repeat at a 7 to 10 day interval.
• Do not make more than 2 sequential applications of Switch or other fungicides in the same group (9 or 12) in a season.
• Do not apply more than 2.9 kg of product/ha/year.
• Observe a 30 day plantback interval for crops not listed.
• Do not enter treated area for 12 hours.

Allegro 500 F

• Controls white mould and Alternaria leaf blight.
• Repeat using a 7 day application interval.
• Maximum 4 applications per year.
• See label details for plantback intervals.
• Do not enter treated area for 24 hours.

Fontelis

• Controls Alternaria blight
• Repeat at 7 to 14 day intervals.
• Do not apply more than 45 L/ha (1.8 L/acre) per season.
• Do not make more than 2 sequential applications before switching to a fungicide with a different mode of action.
• Do not re-enter for 12 hours.

Quadris Top

(azoxystrobin/ difenoconazole)

Group 11 & 3

566 to 1000 mL/ha
(229 to 405 mL/acre)

Apply in 150 L/ha (60 L/acre) of water.

• Controls Alternaria blight.
• Repeat at 7 to 14 day intervals.
• Do not make more than 3 applications per year.
• Do not re-enter treated areas for 12 hours.
• Observe a plant back interval of 60 days for all crops not registered on this label or the Inspire label.

Flint

(trifloxystrobin)

Group 11

140 to 210 g/ha ( 57 to 85 g/acre)

Apply in 100 L/ha (40 L/acre) of water at 241.5 kPa 

• Control or suppression of Alternaria Leaf blight.
• Repeat at 14 day intervals.
• Do not apply more than 840 g/ha (340 g/acre) of product per season.
• Do not make more than 4 applications per season.
• Observe a plantback interval of 30 days for crops not listed.

Quadris

• Apply either in-furrow at seeding or as a banded application over the row soon after emergence or within 30 days of emergence.
• Do not make more than one application per year.
• A plant back interval of 30 days is required for broadleaf and root crops.
• A plant back interval of 45 days is required for cereals.
• Do not enter treated area until residues have dried.

Cavity Spot (Pythium spp.)

Torrent 400 SC

• Suppression only.
• Also suppresses root dieback and forking.
• Do not make more than one application per year.
• Apply as either a post-plant, pre-emergent within 3 days of seeding or as a soil-directed spray 14 days after planting.

Post-plant, pre-emergent application:

• Apply before plant emergence within 3 days of seeding.
• Use sufficient water to ensure full coverage and follow with sprinkler irrigation of 1.25 to 2.5 cm of water.

Surface application (broadcast or band):

• Apply as a soil directed spray, 14 days after seeding.
• Use sufficient water to ensure penetration into the soil or irrigate with 1.25 to 2.5 cm of water.
• For banded applications, use a 15.2 to 20.3 cm band.  See label to calculate amount of product required in the band.

Reason 500SC

(fenamidone)

Group 11

600 mL/ha
(240 mL/acre)

Apply in 300 to 750 L/ha (120 to 300 L/acre) of water 

• Also controls damping off caused by Pythium spp.
• Make the first application within 7 days after planting.
• Repeat at 7 day intervals.
• Do not make more than 2 applications per growing season.
• Observe a plantback interval of 30 days.

Serenade Soil

• Suppression only.
• Serenade Soil (PCP# 30647) is OMRI-Canada listed.  Check with your certification body before using in an organic operation.  

Surface Application:

• Apply as a 15 cm band over the top of the seed row as a broadcast spray after planting.
• Ensure incorporation into the seed zone within 24 hours of application via rainfall or overhead irrigation.

Post-plant applications:

• After crop germination, additional applications may be made to the soil as a drench or spray directed towards the base of the plant.
• Irrigate to move material into the seed or root zone within 24 hours.
• Repeat at 21 to 28 day intervals.

Post-Harvest White Mold/Sclerotinia Rot (Sclerotinia sclerotiorum)

Scholar 230SC

(fludioxonil)

Group 12

N.B.  For domestic use only.  Do not use on product intended for export.

• Apply as a post-harvest dip or drench immediately before storage.
• Dip for approximately 30 seconds and allow carrots to drain.
• Maximum of one application.
• Do not store treated carrots in direct sunlight.
• Replenish the suspension when the volume is too low or when it becomes dirty.
• Runoff and wastes from dipping operation should not be discarded in a drainage which could enter public water systems.