Product
|
Rate
|
PHI*
|
Comments
|
Alternaria Leaf Spot
|
Rovral WP
(iprodione)
Note: Registration cancelled. Last date of use for remaining stocks is June 21, 2021
Group 2
|
3.0 kg/ha
(1.2 kg/acre) |
Cabbage: 7
Cauli: 5
|
-
REGISTERED ON STORED CABBAGE AND CAULIFLOWER ONLY.
-
For stored cabbage, apply 7 to 14 days before harvest.
-
For cauliflower, apply 1 to 2 days prior to tying.
-
Do not make more than 1 application per season.
|
Switch 62.5 WG
(cyprodinil & fludioxonil)
Group 9 & 12 |
775 to 975 g/ha
(310 to 390 g/acre)
Apply in at least 200 L/ha (80 L/acre) of water |
7 |
-
Suppression only.
-
REGISTERED ON CABBAGE ONLY.
-
Apply at first appearance of disease and continue on 7 to 10 day intervals.
-
Do not make more than 2 sequential applications of Switch or other fungicides in the same group (9 or 12) in a season.
-
Do not apply more than 2.9 kg of product/ha/year.
-
Do not apply more than 3 times per year.
-
Observe a 30 day plantback interval for crops not listed.
-
Do not enter treated area for 12 hours.
|
Inspire
(difenoconazole)
Group 3 |
364-512 mL/ha
(147 to 207 mL/acre)
Apply in at least 150 L/ha
(60 L/acre) of water |
3 |
-
Do not apply more than 2.04 L/ha per crop per season.
-
Repeat at a 10 day interval.
-
Do not apply more than 2 sequential treatments without switching to another mode of action.
-
Observe a plantback interval of 8 months for crops not on label.
-
Do not enter treated area for 3 days for hand harvesting, 1 day for scouting, and for all other activities 12 hours.
-
May be tankmixed with Revus or Bravo 500 or Matador 120EC for labeled pests. Follow the most restrictive directions including rate, PHI, maximum applications and re-entry interval.
|
Quadris Top
(azoxystrobin/ difenoconazole)
Group 11 & 3
|
710 to 1000 mL/ha
(290 to 400 mL/acre)
Apply in150 L/ha (60 L/acre) of water.
|
3 |
-
Repeat at 10 to 14 day intervals
-
Do not apply more than 4 times per year.
-
Do not re-enter treated areas for hand-harvesting for 3 days, or for scouting for 1 day. For all other activities do not re-enter for 12 hours.
-
Observe a plant back interval of 60 days for crops not listed on this label or the Inspire label.
|
Quadris F
(azoxystrobin)
Group 11
|
1.12 L/ha
(450 mL/acre)
Apply in 95 L/ha (40 L/acre) of water.
|
1 |
-
REGISTERED ON CABBAGE ONLY.
-
Suppression only.
-
Repeat using a 7 to 14 day application interval.
-
Do not make more than 3 applications per season.
-
Do not apply more than 3.36 L/ha (1.36 L/acre) per season.
-
Do not re-enter treated area for 12 hours.
|
Sercadis
(fluxapyroxad)
Group 7
|
250 to 333 mL/ha
(101 to 135 mL/acre)
Apply in 100 L/ha (40 L/acre) of water
|
3 |
-
Suppression only.
-
Repeat at 7 to 14 day intervals.
-
Do not make more than 3 applications per season.
-
Do not apply more than 1.0 L/ha (405 mL/acre) per season
-
No more than 2 consecutive applications before alternating with a fungicide with a different mode of action.
-
Do not enter treated area for 12 hours.
-
For crops not listed, observe a plant back interval of 1 year.
-
|
Downy Mildew
|
Serenade Opti
(Bacillus subtilis)
Used in organics
|
1.7 to 3.3 kg/ha (690 to 1300 g/acre) |
0 |
-
Suppression only.
-
Make first application immediately at emergence or immediately following transplanting.
-
Repeat using a 10 to 14 day interval.
-
Also suppresses white mould. See White Mould section of this table.
-
Serenade Opti and Serenade Max (PCP# 31666, 28549) are OMRI-Canada listed. Check with your certification body before using in an organic operation.
|
Serenade Max
(Bacillus subtilis)
Note: no longer produced
Used in organics
|
2.0 to 3.0 kg/ha (800 to 1200 g/acre) |
Aliette WDG
(fosetyl-aluminum)
Group U |
2.25 to 3.12 kg/ha
(0.9 to 1.25 kg/acre) |
7
|
-
Maximum of 5 applications per crop season.
-
Repeat at 7 to 14 day intervals.
-
Do not enter treated area for 12 hours.
-
Do not use within one week of a copper application.
|
Orondis
(oxathiapiprolin)
Group 49
|
175 to 350 mL/ha (70 to 140 mL/acre
Apply in 110 L/ha (45 L/acre) of water.
|
0 |
-
do not use in the greenhouse.
-
Repeat at 5 to 10 day intervals.
-
Where multiple crop cycles are produced in the same year, do not make more than 6 applications/ha/year.
-
Do not apply more than 1.40 L/ha (570 mL/acre) per season.
-
Do not re-enter treated area for 12 hours.
|
Revus
(mandipropamid)
Group 40 |
400 to 600 mL/ha
(160 to 240 mL/acre )
Apply in 100 L/ha (40L/acre) of water |
1 |
-
Use a non-ionic adjuvant (0.125% v/v).
-
Repeat at 7 to 10 day intervals.
-
Do not apply more than 4 times per year.
-
Do not enter treated area for 12 hours.
-
May be tank-mixed with Bravo 500. Observe most restrictive directions including rate, PHI and re-entry interval.
|
Presidio
(fluopicolide)
Group 43 |
220 to 292 mL/ha
(89 to 118 mL/acre)
Apply in 200 to 1000 L/ha (80 to 400 L/acre) of water |
2 |
-
Tank-mix with a product that has a group number that is listed in this table for downy mildew. Observe most restrictive directions including rate, PHI and re-entry interval.
-
Do not use in greenhouses.
-
Repeat at 7 to 10 day intervals.
-
Do not make more than 4 applications per season.
-
Do not apply more than 880 mL/ha (356 mL/acre) per season.
-
Do not enter treated area for 12 hours.
|
Pristine WG
(boscalid and pyraclostrobin)
Group 7 & 11 |
1.0 kg/ha
(400 g/acre) |
4 |
-
Suppression only.
-
Repeat at 7 to 10 day intervals.
-
Maximum of 4 applications per season
-
Do not re-enter until residues have dried.
|
Reason 500 SC
(fenamindone)
Group 11 |
400 to 600 mL/ha
(160 to 240 mL/acre)
Apply in 150 to 250 L/ha (60 to 100 L/acre) of water
|
2 |
-
Suppression only.
-
Repeat at 5 to 10 day intervals.
-
Maximum 3 applications per season.
-
Observe a plantback interval of 30 days for all crops.
-
Do not enter treated area for 48 hours.
|
Forum
(dimethomorph)
Group 40
|
450 mL/ha
(180 mL/acre)
Apply in at least 200 L/ha (80 L/acre) of water.
|
7 |
-
Suppression only.
-
Apply as a tank mix with another fungicide in this table that is active against downy mildew. Observe most restrictive directions including rate, PHI and re-entry interval.
-
Apply in at least 200 L/ha (80 L/acre) of water.
-
Repeat at 7 day spray intervals.
-
Maximum of 5 applications per season
-
Do not re-enter to perform hand-harvesting or irrigation for 7 days, or for scouting for 5 days. For all other activities, do not re-enter for 12 hours.
-
|
|
Zampro
(ametoctradin & dimethomorph)
Group 40 & 45
|
0.8 to 1.0 L/ha
(300 to 400 mL /acre)
Apply in at least 200 L/ha (80 L/acre) of water. |
0 |
-
Repeat at 7 day intervals.
-
Do not apply more than 3 times per season.
-
Use a spreading/penetrating adjuvant at the rate of 0.125% v/v.
-
Do not use non-ionic surfactants such as Agral 90 or Induce.
-
Do not re-enter for hand harvesting or irrigation for 6 days, or for scouting for 4 days. For all other activities, do not re-enter for 12 hours.
-
Do not use in greenhouses.
-
Observe a plantback interval of 30 days for all crops not on the label.
|
Phostrol
(mono- and dibasic sodium, potassium, and ammonium phosphites)
Group 33
|
2.9 to 5.8 L/ha (1.2 to 2.3 L/acre)
Apply in 225 L/ha (90 L/acre) of water.
|
0 |
-
Suppression only.
-
Repeat at 7 to 21 day intervals.
-
Do not make more than 4 applications per season.
-
Do no re-enter treated area for 12 hours.
|
Rampart
(mono- and dipotassium salts of phosphorous acid)
Group 33
|
3 to 7 L/ha (1.2 to 2.8 L/acre)
Apply in 300 to 500 L/ha (120 to 200 L/acre) of water.
|
1 |
-
Suppression only.
-
Repeat at 1 to 3 week intervals.
-
For brassicas with one crop cycle per season, do no make more than 8 applications.
-
For brassicas with multiple crop cycles per season, do not make more than 3 applications per crop cycle; and do not make more than 12 applications per season.
-
Do not apply to plants that are dormant or heat stressed.
-
Do not apply to plants treated with copper-based compounds at less than 20 day intervals.
-
Do not apply when conditions favour wet tissue for periods longer than 4 hours.
-
Do not re-enter treated area for 4 hours.
|
Confine Extra
(mono- and di-potassium salts of phosphorous acid)
Group 33
|
3 to 6 L/ha
(1.2 to 2.4 L /acre)
Apply in 100 L/ha (40 L/acre) of water.
|
1 |
-
Suppression only.
-
Repeat using a 7 to 21 day interval.
-
Do not make more than 6 applications per growing season.
-
Tankmixing with pesticide products containing a metal base and/or micronutrients may not be compatible and could potentially cause plant injury. See label for details.
|
Torrent
(cyazofamid)
Group 21
|
0.2 L/ha
(80 mL /acre)
Apply in 300 to 500 L/ha (120 to 200 L/acre) of water |
1 |
-
Suppression only.
-
Repeat as a foliar broadcast at 7 to 10 day intervals.
-
Do not apply more than 5 times per crop per year.
-
Tankmix with a non-ionic or organosilicone surfactant such as Sylgard 309 at a the rate of 0.15 L/ha (60 mL/acre).
-
Do not enter treated area for 12 hours.
-
Also controls Pythium Root Rot and Pythium damping-off when applied as a soil drench to greenhouse transplants for field production. See Pythium Root Rot section of this table for details.
|
|
Alternaria Leaf Spot and Downy Mildew
|
Bravo 500
(chlorothalonil)
Group M |
2.5 to 4.8 L/ha
(1.0 to 1.9 L/acre) |
7 |
-
Apply on a 7 to 10 day schedule.
-
Do not enter treated area for 48 hours.
|
Copper 53W
(tri-basic copper sulphate)
Group M |
4.0 kg/ha
(1.6 kg/acre) |
1 |
-
ALSO REGISTERED FOR BACTERIAL LEAF SPOT (PSEUDOMONAS SPP.) ON BRUSSELS SPROUTS.
For Brussels Sprouts:
-
Apply no more than 2 times per season.
-
Repeat at a 14 to 21 day interval
-
Apply in 1000 L/ha (405 L/acre) of water.
|
Echo 90 DF
(chlorothalonil)
Group M |
1.4 to2.7 kg/ha
(600 to 1100 g/acre) |
7 |
-
Repeat at 7 to 10 day intervals.
-
Do not apply more than 5 times per season.
-
Do not enter treated area for 48 hours.
-
Do not apply within 10 days before or after an oil application.
-
Apply in 50 to 1600 L/ha (20 to 650 L/acre) of water
|
Echo 720
(chlorothalonil)
Group M |
1.7 to 3.3 L/ha
(700 to 1300 mL/acre) |
Clubroot (Plasmodiophora brassicae)
|
Allegro 500F
(fluazinam)
Group 29 |
Transplant Treatment: 50 mL |
65 |
-
Apply 100 mL of solution per plant immediately after transplanting.
-
Do not follow with a pre-transplant treatment.
-
Do not enter treated area for 24 hours.
-
Apply in 100L of water.
|
Pre-Transplant Treatment: 2.9 L/ha
(1.2 L/acre)
Apply in 500 L/ha (200 L/acre) of water |
65 |
-
Apply in a minimum band of 25cm along the planting row and incorporate to a depth of 15 to 20cm with a precision incorporator in the same operation.
-
Transplant the seedlings into the treated band. If planting to a bed, a broadcast application could be made prior to forming the bed.
-
Do not follow with a transplant treatment.
-
Do not enter treated area for 24 hours
|
Plant-back Interval (PBI): Areas treated can be planted to potatoes as soon as practical. For other root crops & leafy vegetables, the PBI is 30 days. For all other crops, PBI is 70 days. |
White Mould
|
Serenade Opti
(Bacillus subtilis)
Used in organics
|
1.7 to 3.3 kg/ha
(690 to 1300 g/acre) |
0 |
-
Suppression only.
-
Make the first application at emergence, or immediately following transplanting.
-
Repeat using a 10 to 14 day interval.
-
Also suppresses downy mildew. See Downey Mildew section of this table.
-
Serenade Opti and Serenade Max (PCP# 31666, 28549) are OMRI-Canada listed. Check with your certification body before using in an organic operation.
|
Serenade Max
(Bacillus subtilis)
Used in organics
|
3.0 to 6.0 kg/ha
(1.2 to 2.4 kg/acre) |
Pythium Root Rot (Pythium spp.)
|
Torrent
(cyazofamid)
Group 21
|
30 mL/100L water |
60 |
-
REGISTERED ON GREENHOUSE BRASSICA LEAFY VEGETABLE (Crop Group 5) TRANSPLANTS FOR FIELD PRODUCTION.
-
Also controls Pythium damping-off.
-
Apply once in the greenhouse as a soil drench to thoroughly wet the growing medium immediately after seeding.
-
Do not use a surfactant.
-
Do not enter treated area for 12 hours.
-
Also suppresses downy mildew when applied as a foliar spray to leafy brassica vegetables (Crop Group 5) in the field. See Downy Mildew section of this table for details.
|
|
Serenade Soil
(QST 713 strain of dried Bacillus subtilis)
Used in organics.
|
2.7 to 14 L/ha (1.1 to 5.7 L/acre) |
0 |
-
Suppression only.
-
Also suppresses Rhizoctonia damping-off.
-
May be applied as a surface application to direct-seeded crop or as a tranplant drench.
-
Serenade Soil (PCP# 30647) is OMRI-Canada listed. Check with your certification body before using in an organic operation.
Transplant drench:
-
Apply as a drench at the time of transplanting.
-
Apply at a rate to thoroughly soak the growing media through the root zone or asa drench or directed spray using sufficient water to soak the root zone.
Surface Application:
-
Apply as a 15 cm band over the top of the seed row as a broadcast spray after planting.
-
Ensure incorporation into the seed zone within 24 hours of application via rainfall or overhead irrigation.
Post-plant applications:
-
Additional applications may be made to the soil as a drench or spray directed towards the base of the plant.
-
Irrigate to move material into the seed, root or transplant zone within 24 hours.
-
Repeat at 21 to 28 day intervals.
|
Aliette WDG
(fosetyl-aluminum)
Group 33
|
20 to 30 g product per 100 m2 in 20 L water per 100 m2 |
7 |
-
REGISTERED ON GREENHOUSE BROCCOLI AND CABBAGE TRANSPLANTS ONLY.
-
Controls only damping off caused by Pythium spp.
-
Apply as a drench.
-
Make first application during the propagation stage.
-
For control of late damping off, repeat 7 days prior to transplanting.
-
Do not enter treated area for 12 hours.
-
Do not use within one week of a copper application.
|
*PHI = Pre-harvest interval.
BUFFERS – Refer to product label for buffer requirements. See also Pesticide Regulations and Safety section of this guide.
PESTICIDE GROUP DETAILS – see Pesticide Toxicity Table of this guide.
OMRI-Canada = Organic Materials Review Institute of Canada
|