Product

Rate

PHI*

Comments

Kocide 2000

(copper hydroxide)

• Repeat at 7 day intervals.
• Group M fungicide.

Parasol F

(copper hydroxide)

Group M

• Combine with 1.75 to 2.25 kg/ha (0.7 to 0.9 kg/acre) mancozeb 80%.
• Apply at 7 to 10 day intervals.

Cueva

(copper octanoate)

Group M1

• Also controls Bacterial speck (Pseudomonas syringae).
• For a 0.5% solution, mix 1 part Cueva to 200 parts water.
• For a 2% solution, mix 1 part Cueva to 50 parts water.
• Repeat at 7 to 10 day intervals.
• Repeat at 5 to 7 day intervals following heavy rain or when disease pressure is high.
• Do not make more than 15 applications per year.
• Time applications so that 12 hours of dry weather follow application.
• Do not re-enter treated area for 4 hours.
• See sections below for control of late blight, early blight and bacterial canker.

Serenade Max

(Bacillus subtilis)

• Suppression only.
• Repeat at 7 to 10 day intervals.
• ☺ Approved for use in organics.

Serenade ASO

(Bacillus subtilis)

Actigard 50WG

(acivenzolar – S –methyl)

• Suppression only.
• Also suppresses bacterial speck.
• Begin treatment within 1 week of transplanting or emergence.
• Apply at a 7 day interval.
• Maximum 8 applications per season.
• Observe a plantback interval of 30 days for all crops not on label.
• Do not enter treated area for 12 hours.

Regalia Maxx

(Extract of Reynoutria sachalinensis)

0.125 to 0.25% v/v

in 400 to 1000 L/ha (160 to 400 L/acre) of water

• Suppression only.
• Also suppresses powdery mildew.
• Begin applications after transplanting.
• Repeat at 7 to 10 day intervals.
• ☺Approved for use in organics

Kasumin 2L

• Suppression only.
• Apply at 7 day intervals.
• Do not make more than 3 applications per season.
• Do not apply more than 3.6 L/Ha (1.5 L/acre) per year.
• Do not make more than 2 consecutive applications.
• For resistance management purposes, do not apply on greenhouse transplants.
• May be tankmixed with Kocide 2000.  Follow the most stringent label precautionary measures for mixing, loading and applying stated on both product labels.
• Also suppresses Bacterial Stem Canker (see section below).

Bravo 500

(chlorothalonil)

• Repeat at 8 to 10 day intervals.
• Do not enter treated areas for 48 hours.
• Do not apply Echo 90 DF more than 9 times per season.
• Group M fungicide.

Echo 90 DF

(chlorothalonil)

Echo 720

(chlorothalonil)

Lance WDG

(boscalid)

• Repeat at 7 to 10 day intervals.
• Do not make more than 2 applications per season.
• Do not enter treated area for 12 hours.
• For crops not on the label, observe a plant back interval of 14 days.
• Group 7 fungicides.

Cantus WDG

(boscalid)

Rovral WP

(iprodione)

• Use in the greenhouse only.
• Do not enter treated area for 12 hours.
• Group 2 fungicide.

Scala SC

(pyrimethanil)

Group 9

• Also controls early blight.
• Apply in a tank mixture with Bravo 500 according to Bravo label directions.
• Begin applications when plants are 15 to 20 cm tall.
• Repeat at 7 to 14 day intervals.
• Do not apply more than 3.75 L/ha (1.5 L/acre) per season.
• For all crops not listed on the label, observe a 30 day plant-back interval.
• Apply in 300 L/ha (120 L/acre) of water

Serenade Max

(Bacillus subtilis)

• Suppression only.
• Begin application when plants are 15 to 25 cm tall, or when disease threatens.
• Repeat at 7 to 10 day intervals.
• ☺ Approved for use in organics.

Serenade ASO

(Bacillus subtilis)

Fontelis

(penthiopyrad)

Group 7

• Repeat at 7 to 10 day intervals.
• Do not apply more than 5.25 L/ha (2.2 L/acre) per season.
• Do not make more than 2 sequential applications before switching to a fungicide with a different mode of action.
• Do not re-enter for 12 hours.

Bravo 500

(chlorothalonil)

• Spray on an 8 to 10 day schedule at the lower rate, or a 14 day schedule at the higher rate.
• This is the preferred product for Interior areas where early blight is a serious problem.
• Do not enter treated areas for 48 hours.
• Do not apply Echo 90 DF more than 9 times per season.
• Group M fungicides.

Echo 90 DF

(chlorothalonil)

Echo 720

(chlorothalonil)

Copper 53W

(tri-basic copper sulphate)

Group M

Copper oxychloride 50

(copper oxychloride)

Group M

• Start spraying when plants are 10 to 13 cm high.
• Repeat at 7 to 10 day intervals.
• Apply in 1000 L/ha (405 L/acre) of water.

Cueva

(copper octanoate)

Group M1

• For a 0.5% solution, mix 1 part Cueva to 200 parts water.
• For a 2% solution, mix 1 part Cueva to 50 parts water.
• Repeat at 7 to 10 day intervals.
• Repeat at 5 to 7 day intervals following heavy rain or when disease pressure is high.
• Do not make more than 15 applications per year.
• Time applications so that 12 hours of dry weather follow application.
• Do not re-enter treated area for 4 hours.
• See sections above and below for control of bacterial spot, bacterial speck and bacterial canker.

Dithane DG Rainshield NT

(mancozeb)

• Repeat at 7 to 10 day intervals.
• Group M fungicide.

Dithane F-45

(mancozeb)

Manzate DF

(mancozeb)

Group M

• Repeat at 7 to 10 day intervals.
• Use the lower rate on young plants.
• Apply in 200 to 1000 L/ha (80 to 405 L/acre) of water.

Penncozeb 75DF

(mancozeb)

• Repeat every 7 to 10 days.
• Do not enter treated area for 24 hours.
• Group M fungicide.

Penncozeb 75DF Raincoat

(mancozeb)

Polyram DF

(metiram)

• Apply when first fruit has formed.
• Repeat at 7 to 10 day intervals.
• Group M fungicide.

Cabrio EG

(pyraclostrobin)

Group 11

• Apply in 225 L/ha (91 L/acre) of water.
• Repeat at 7 to 14 day intervals for early blight.
• Repeat at 7 day intervals for late blight.
• No more than 6 applications per season.
• Do not enter treated area for 12 hours.
• Do not use treated crops for feed.

Revus

(mandipropamid)
 

Group 40

• Use a non-ionic adjuvant (0.25% v/v).
• Repeat at 7 to 10 day intervals.
• Do not apply more than 4 times per year.
• May be tank-mixed with Bravo 500. Check Bravo Label for PHI and re-entry interval.
• Do not apply to greenhouse-grown seedlings to be transplanted in the field, until after they have been transplanted out.
• Do not enter treated area for 12 hours.

Tanos 50 DF

(famoxadone / cymoxanil)

Group 11 & 27

• Do not use on U-pick operations.
• Maximum of 6 applications per year.
• Make the first application of Tanos following one or two applications of a preventative broad spectrum fungicide such as chlorothalonil or mancozeb.
• Apply at 7 day intervals.
• Do not apply to stressed plants.
• Harmful to beneficials.
• Observe a 1 year plant back interval for crops not on the label.
• Do not enter treated area for 24 hours.

Presidio

(fluopicolide)

Group 43

• Controls only late blight.
• Tank-mix with a product that has a different mode of action listed in this table for late blight, such as Bravo 500. Follow most restrictive directions including rate, PHI and re-entry interval.
• Maximum of 880 mL/ha (356 mL/acre) per season.
• Do not enter treated for 12 hours.

Reason 500SC

(fenamidone)

Group 11

Plus:

Dithane DG Rainshield NT

(mancozeb)

Group M

Or

Bravo 500

(chlorothalonil)

Group M

200 mL/ha
(81mL/acre)

 

Plus:

1.25 kg/ha
(500 g/acre)


Or

1.25 L/ha
(500 mL/acre)

• Begin application when plants are 15 to 20 cm high, or when disease threatens (whichever comes first).
• Tank mix with Dithane DG or Bravo 500.
• Do not apply more than 6 times per year.
• Observe a 30 day plant back interval for all crops.
• Do not re-enter treated area for 12 hours.

Lance WDG

(boscalid)

• Repeat at 7 to 10 day intervals.
• No more than 2 applications per season for botrytis, and 5 applications per season in total
• Also registered for Botrytis grey mould).
• Do not enter treated area for 12 hours.
• For crops not on the label, observe a plant back interval of 14 days.
• Group 7 fungicides.

Cantus WDG

(boscalid)

Kocide 2000

(copper hydroxide)

• Repeat at 7 day intervals.
• Maximum 10 applications per season.
• Group M fungicide.

Quadris F

(axosystrobin)

Group 11

• Do not apply until 21 days after transplanting.
• Repeat at 7 to 14 day intervals.
• Do not apply more than 3 times per season.
• To avoid damage, do not apply within 6 days, either before or after, the use of metribuzin.
• Do not enter treated area until residues have dried.

Quadris Top

(azoxystrobin/ difenoconazole)

Group 11 & 3

625 mL/ha
(253 mL/acre)

Apply in at least 150 L/ha (60 L/acre) of water.

• Do not apply until 21 days after transplanting or 35 days after seeding.
• Repeat at 7 to 14 day intervals
• Do not apply more than 3 times per season.
• Do not re-enter treated areas for 12 hours.
• To avoid damage, do not apply within 6 days, either before or after, a broadcast application of metribuzin.
• Observe a plant back interval of 60 days for crops not listed on this label or the Inspire label. 

Elatus

(benzovindiflupyr/

azoxystrobin)

Group 11 & 7

333 to 417 g/ha (135 to 169 g/acre)

Apply in 150 L/ha (60 L/acre) of water.

• Apply as a broadcast foliar spray.
• Do not apply until 21 days after transplanting.
• Repeat at 7 to 14 day intervals.
• Do not apply more than 1.2 kg/ha (0.5 kg/acre) per season.
• Observe a plantback interval of 6 months for crops not listed.
• See section below for control of Anthracnose.

Inspire

(difenoconazole)

Group 3

292 to 512 mL/ha
(118 to 207 mL/acre)

Apply in 150 L/ha (60 L/acre) of water

• Repeat at 7 to 14 day intervals.
• Do not apply more than 2.04 L/ha (0.82 L/acre) per crop per season.
• Do not re-enter treated area for 12 hours.

Aprovia Top

(benzovindiflupyr/

difenoconazole)

Group 3 & 7

643 to 967 mL/ha (260 to 391 mL/acre

Apply in 150 L/ha (60 L/acre) of water.

• Apply as a broadcast foliar spray.
• Repeat at 7 to 14 day intervals.
• Do not apply more than 3.9 L/ha (1.6 L/acre) per season.
• Observe a plantback interval of 60 days for sweet corn and 6 months for crops not listed.
• Do not re-enter treated area for 12 hours.
• See this table section below for suppression of anthracnose.

Serenade Max

(Bacillus subtilis)

• Suppression only.
• Begin application when plants are 15 to 25 cm tall.
• Repeat at 7 to 10 day intervals.
• ☺ Approved for use in organics.

Serenade ASO

(Bacillus subtilis)

Zampro

(ametoctradin & dimethomorph)

Group 40 & 45

• Repeat at 5 to 7 day intervals.
• Do not apply more than 3 times per season.
• Use a spreading/penetrating adjuvant.
• Do not re-enter for 12 hours.
• Do not use in greenhouses.
• Observe a plantback interval of 30 days for all crops not on the label.

Phostrol

(mono- and dibasic sodium, potassium, and ammonium phosphites)

Group 33

2.9 to 5.6 L/ha
(1.2 to 2.3 L  /acre)

Apply in 225 L/ha (90 L/acre) of water.

• Supression only.
• Repeat at 7 to 14 day intervals.
• Do not make more than 7 applications per season.
• Do not re-enter treated area for 12 hours.

Confine Extra        

(mono- and di-potassium salts of phosphorous acid)

Group 33

5 to 10 L/ha
(2.0 to 4.0 L  /acre)

Apply in 100 L/ha (40 L/acre) of water.

• Suppression only.
• Do not make more than 5 applications per growing season.
• Repeat at 7 to 14 day intervals.
• First use should be limited to a small area of each variety, to confirm tolerance prior to adoption as a general field practice.
• Tankmixing with pesticide products containing a metal base and/or micronutrients may not be compatible and could potentially cause plant injury.  See label for details.

Acrobat 50 WP

(dimethomorph)

Note:  no longer produced.
 

• Apply as a tank mix with another fungicide active against late blight in this table.
• Apply in at least 200 L/ha (80 L/acre) of water.
• Start applications when plants are 46 inches high.
• Repeat at 5 to 10 day spray intervals.
• Maximum of 5 applications per season
• Observe a plant back interval of 120 days for a new crop in the treated area.
• Do not re-enter treated area for 12 hours.
• Do not apply to greenhouse vegetables.
• Group 40 fungicide.

Forum

(dimethomorph)

Cyazofamid 400SC (formerly Ranman 400SC)

(cyazofamid)

Group 21

• Repeat as a foliar broadcast at 7 to 10 day intervals.
• Do not apply more than 5 times per crop per year.
• Use a non-ionic or organosilicone surfactant such as Sylgard at a 4:3 ratio (Cyazofamid 400SC: Sylgard) or at the label recommendations.
• Where Cyazofamid 400SC is applied alone, do not use a group 21 fungicide more than once for every 3 fungicide applications.
• Do not enter treated area for 12 hours.
• Observe a plantback interval of 30 days for crops not listed on the label.

Torrent 400SC

(cyazofamid)

Group 21

Taegro

364 g/ha (147 g/acre)

Apply in 935.4 L/ha (378.6 L/acre) of water

• Suppression only.
• Water-in product after applying.
• Repeat at 7 day intervals.

Tattoo C

(propamocarb HCl & chlorothalonil)

Group 28 M

• Repeat at 7 to 14 day intervals.
• Do not apply more than 3 times per season.
• Wait a minimum of 7 days after treatment before applying any product containing chlorothalonil (i.e. Bravo, Echo).
• Do not re-enter for 48 hours after treatment.  If required, re-entry is permitted within 48 hours of treatment for short term tasks not involving hand labour provided that 4 hours have passed since application and that long pants and a long-sleeved shirt are worn.
• Observe a plantback interval of 30 days for root and leafy vegetables and 120 days for winter wheat and all other crops not on the label.

Orondis

(oxathiapiprolin)

Group U15

175 to 350 mL/ha (70 to 140 mL/acre

Apply in 110 L/ha (45 L/acre) of water.

• Repeat at 5 to 14 day intervals.
• Do not make more than 4 application per crop, per year.
• Where multiple crop cycles are produced in the same year, do not make more than 6 applications/ha/year.
• Do not apply more than 1.40 L/ha (570 mL/acre) per season.
• Do not re-enter treated area for 12 hours.

Bravo 500

(chlorothalonil)

2.4 to 4.0 L/ha

(1.0 to 1.6 L/acr

1

• Begin spraying when disease threatens.
• Spray on an 8 to 10 day schedule at the lower rate, or a 14 day schedule at the higher rate.
• Do not enter treated areas for 48 hours.
• Do not apply Echo 90 DF more than 9 times per season.
• Group M fungicides.

Echo 90 DF

(chlorothalonil)

1.3 to 2.2 kg/ha

(500 to 900 g/acre)

Echo 720

(chlorothalonil)

1.7 to 2.8 L/ha

(0.7 to 1.1 L/acre)

Copper 53W

(tri-basic copper sulphate)

Group M

• Apply when plants are 15 cm tall, and repeat at 7 to 10 day intervals

Supra Captan 80WDG

(chlorothalonil)

2.75 to 4.25 kg/ha

(1.1 to 1.7 kg/acre)

2

• Use the higher rate on mature plants.
• Apply at 5 to 7 day intervals.
• Do not enter treated for 48 hours.
• Group M fungicides.

Maestro 80DF

(captan)

Dithane DG Rainshield NT

(mancozeb)

• Repeat every 7 to 10 day.
• Group M fungicide.

Dithane F-45

(mancozeb)

Manzate DF

(mancozeb)

Group M

• Repeat at 7 to 10 day intervals.
• Use the lower rate on young plants.
• Apply in 200 to 1000 L/ha (80 to 405 L/acre) of water.

Penncozeb 75DF

(mancozeb)

• Repeat every 7 to 10 days.
• Do not enter treated area for 24 hours.
• Group M fungicide.

Penncozeb 75DF Raincoat

(mancozeb)

Polyram DF

(metiram)

• Apply when the fruit first forms.
• Repeat at 7 day intervals.
• Group M fungicide.

Cabrio EG

(pyraclostrobin)

• See comments under Early and Late Blight section, this table.
• Group 11 fungicide.

Quadris F

(axosystrobin)
 

• Apply on a 7 to 10 day interval, starting at first fruit set.
• See other comments under Early Blight section, this table.
• Group 11 fungicide.

Quadris Top

(azoxystrobin/ difenoconazole)

Group 11 & 3

625 mL/ha
(253 mL/acre)

Apply in at least 150 L/ha (60 L/acre) of water.

• Do not apply until 21 days after transplanting or 35 days after seeding.
• Repeat at 7 to 10 day intervals
• Do not apply more than 3 times per season.
• Do not re-enter treated areas for 12 hours.
• To avoid damage, do not apply within 6 days, either before or after, a broadcast application of metribuzin.
• Observe a plant back interval of 60 days for crops not listed on this label or the Inspire label. 

Elatus

(benzovindiflupyr/

azoxystrobin)

Group 11 & 7

333 to 417 g/ha (135 to 169 g/acre)

Apply in 150 L/ha (60 L/acre) of water.

• Begin broadcast foliar applications at fruit set.
• Do not apply until 21 days after transplanting.
• Repeat at 7 day intervals.
• Do not apply more than 1.2 kg/ha (0.5 kg/acre) per season.
• Observe a plantback interval of 6 months for crops not listed.
• See this table section above for control of early blight.

Inspire

(difenoconazole)

Group 3

512 mL/ha
(207 mL/acre)

Apply in 150 L/ha (60 L/acre) of water

• Repeat at 7 to 14 day intervals.
• Do not apply more than 2.04 L/ha (0.82 L/acre) per crop per season.
• Do not re-enter treated area for 12 hours.

Aprovia Top

(benzovindiflupyr/

difenoconazole)

Group 3 & 7

643 to 967 mL/ha (260 to 391 mL/acre

Apply in 150 L/ha (60 L/acre) of water.

• Suppression only.
• Apply as a broadcast foliar spray, starting at first fruit set.
• Repeat at 7 day intervals.
• Do not apply more than 3.9 L/ha (1.6 L/acre) per season.
• Observe a plantback interval of 60 days for sweet corn and 6 months for crops not listed.
• Do not re-enter treated area for 12 hours.
• See this table section above for control of early blight.

Tivano
 

(Citric acid & lactic acid)

Fermentation products of Lactobacillus casei strain
LPT-111

• Suppression only.
• Repeat at 5 to 10 day intervals.
• Shake well before using.
• Do not re-enter until spray has dried.

Kocide 2000

(copper hydroxide)

• Repeat at 7 day intervals.
• Group M fungicide.

Cueva

(copper octanoate)

Group M1

• For a 0.5% solution, mix 1 part Cueva to 200 parts water.
• For a 2% solution, mix 1 part Cueva to 50 parts water.
• Repeat at 7 to 10 day intervals.
• Repeat at 5 to 7 day intervals following heavy rain or when disease pressure is high.
• Do not make more than 15 applications per year.
• Time applications so that 12 hours of dry weather follow application.
• Do not re-enter treated area for 4 hours.
• See this table sections above for control of bacterial spot, bacterial speck, early blight and late blight.

Kasumin 2L

• Suppression only.
• Apply at 7 day intervals.
• Do not make more than 3 applications per season.
• Do not apply more than 3.6 L/Ha (1.5 L/acre) per year.
• Do not make more than 2 consecutive applications.
• For resistance management purposes, do not apply on greenhouse transplants.
• May be tankmixed with Kocide 2000.  Follow the most stringent label precautionary measures for mixing, loading and applying stated on both product labels.
• Also suppresses Bacterial Spot (see this table section above).

Pythium Damping - Off and Root Rot (Pythium spp.)

Cyazofamid 400SC (formerly Ranman 400SC)

• REGISTERED ON GREENHOUSE TOMATO TRANSPLANTS.
• Apply once in the greenhouse as a soil drench to thoroughly wet the growing medium immediately after seeding.
• Do not use a surfactant.
• Do not enter treated area for 12 hours.
• Group 21 fungicides.

Torrent 400 SC

(cyazofamid)